UltraScape Cempoint – 25kg

Free next working day delivery if ordered by 2pm

UltraScape Cempoint Gun Injected Mortar

UltraScape Cempoint provides a quick and clean method of jointing both horizontal and vertical faces (such as cladding and steps). Still meeting the strict demands of BS 7533, Cempoint combines all the benefits of this exacting standard with the convenience of being installed using a hand-held mortar gun. The light and pliable texture of UltraScape Cempoint makes it fast and convenient to work with and the hand-held mortar gun allows intricate areas to be grouted neatly.

• Mixed easily on-site with water
• Conforms to BS 7533
• Excellent compatibility
• Resistance to freeze/thaw weather conditions
• Shrinkage compensated
• Fast and easy application
• Approved for use on the London Underground and Overground
• 20kg paper bags
• NBS Plus registered for ease of specification

Applications

UltraScape Cempoint is a cementitious gun injected pointing mortar that conforms to the strict demands of BS 7533. Specifically formulated for the jointing of flags, re-pointing of brickwork, block work and stone walling, the product is also shrinkage compensated, economical, fast and easy to apply, thus reducing costs and minimising downtime.

Technical

UltraScape Cempoint is pre-blended with specialist cements and graded fillers and supplied in 20kg paper bags. The simple addition of water produces an easily gun injected pointing mortar, which has excellent compatibility and is resistant to freeze-thaw weather conditions. UltraScape Cempoint is suitable for joint widths of between 5-25mm and in joint depths of 25-100mm.

Preparation

Paving All joints must be free from any loose debris, clean and pre-soaked with water. Remove all ponded water prior to application but ensure that joints remain wet while the product is used. Re-pointing Cut or grind loose friable mortar to provide a clean, open-faced cavity. Ensure the surface is free from oil, paint, algae etc. Remove all dust created by grinding with a brush, before pre-soaking the area about to receive the pointing mortar. Do not apply product to areas with ponded water. Mixing Place up to 3.2 litres of clean water into a suitable drum or forced action mixer. Add the contents of the 20kg bag of UltraScape Cempoint and mix between 3-5 minutes to achieve an even smooth mix. Allow material to stand for 5 minutes before application. Placing Transfer material into a wet mortar gun with a trowel. Ensure there is good contact with substrate during application. Move steadily along the prepared joints to ensure a quality finish. Finishing UltraScape Cempoint should be tooled off whilst wet to the required profile by the use of a standard pointing tool. Ensure all material is removed from the face whilst still wet. The area can accept pedestrian traffic after 12 hours and vehicular traffic after 24 hours. To view our extensive range of landscaping products click here