Sikabond SBR + Waterproofing Agent

The post Sikabond SBR + Waterproof Bonding Agent appeared first on Solseal.

Ronafloor Concrete Dustproofer 16.5L

RonaFloor Concrete Dustproofer is a liquid surface hardener and dustproofer for the treatment of new and old concrete floors. It reduces dusting and wear and enhances the performance of the floor surface. It is supplied in concentrated form and diluted with clean water before use.

It is quick and easy to apply. Within 48 hours the floor surface is treated and ready to use. RonaFloor Concrete Dustproofer is designed for application on to porous and dusting floors and not those which have a dense surface finish or are waterproof (eg. contain Ronafix or are based on a similar product).

The chemicals in RonaFloor Concrete Dustproofer aid the penetration, increasing the depth to which it will reach and react. Its  combination and reaction with free lime in the floor screed matrix converts the particles to hard, stable crystals. These crystals are bonded to, and become an integral part of, the floor.

Features and Benefits

• Dustproofing; binds surface to reduce or eliminate dust formation
• Durable; improved resistance to physical and mild chemical attack
• Easy to apply; no special tools or skills needed
• Economical; low cost material and application system

More product detail

The post Ronacrete Ronafloor Concrete Dustproofer 16.5L appeared first on Solseal.

RonaScreed FastDry Prompt is a fast-drying additive for site batched screeds used to quickly reduce the level of retained moisture within the screed. This allows floor coverings to be laid over the screed much sooner than with conventional screeds.

RonaScreed FastDry Prompt gains strength quickly, permitting early access by following trades.

Drying of screeds incorporating RonaScreed FastDry Prompt is influenced by heat generated during curing, meaning drying of thicker screeds is faster per millimetre of screed thickness. Screeds installed at 50mm can accept moisture sensitive floor coverings after only 4 days, 75mm and 100mm screeds can accept the same coverings after only 6 days.

LFeatures and Benefits

• 50mm screeds can be covered after 4 days
• 75mm screeds can be covered after 6 days
• 100mm screeds can be covered after 6 days
• Commissioning of underfloor heating can commence after 2 days
• Open to foot traffic and trades next day
• Reduces on site delays
• Rapid early strength development
• No license required

More product detail

The post Ronacrete Ronascreed FastDry Prompt appeared first on Solseal.

Ronafix Universal

Ronafix is a single part SBR admixture for cement mortars that enhances physical and chemical properties, allows mortars to be placed in thin section, provides waterproofing and resistance to frost, and promotes adhesion to building surfaces.

Mortars containing Ronafix are used for a wide range of applications where thin high strength high-performance mortars are required. The typical minimum application depth is 6mm.

Ronafix is supplied as a single component white liquid. According to its specified use within mortars, it is diluted with water and added to cement, sand (and aggregate) to provide the required performance characteristics. As a priming or bonding coat Ronafix is used with cement only to provide adhesion between substrate and mortar.

Applications For Ronafix Include:

• Floor screeds
• Concrete repair
• Waterproof renders
• Slurry coats/levelling and protective
• Heavy-duty floor toppings
• Protection of steel reinforcement
• Bedding and bonding mortars
• Tanking and waterproofing

The post Ronacrete Ronafix Universal appeared first on Solseal.