Ronacrete Standard Primer

Ronacrete Standard Primer is a prebagged cementitious bonding primer comprising polymer liquid and specially graded cements.

• Bonds new concrete to old
• Provides a strong chemical bond
• Multiple coats provide protection to steel reinforcement
• Easy to apply
• Available in 2kg and 10kg buckets

Ronacrete Standard Primer is used to provide a chemical bond between the substrate and new surfacing. It is only to be used with Ronacrete’s mortars and concretes including RonaBond HB40, RonaBond Concrete Repair Mortar, RonaBond Lightweight Repair Mortar, Ronafix Pre-packed Mortars and RonaBond Bedding Mortar.

The post Ronacrete Standard Primer appeared first on Solseal.

Ronabond Concrete Repair Mortar 25kg

RonaBond Concrete Repair Mortar is a prepacked, ready to use mortar for concrete repair and is used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces.

RonaBond Concrete Repair Mortar is used to repair and replace concrete damaged as a result of spalling through reinforcement corrosion, freeze/thaw cycling, impact or other damage.

• Conforms to BS EN 1504-3
• Excellent long term durability – will last as long as the surrounding concrete
• Provides protection to steel reinforcement from carbonation
• Frostproof
• Compressive strength in excess of 45N/mm2
• Suitable for structural and cosmetic repairs
• Approved by WRC for use in contact with potable water

More product detail

The post Ronacrete Ronabond Concrete Repair Mortar 25kg appeared first on Solseal.

Ronafloor Concrete Dustproofer 16.5L

RonaFloor Concrete Dustproofer is a liquid surface hardener and dustproofer for the treatment of new and old concrete floors. It reduces dusting and wear and enhances the performance of the floor surface. It is supplied in concentrated form and diluted with clean water before use.

It is quick and easy to apply. Within 48 hours the floor surface is treated and ready to use. RonaFloor Concrete Dustproofer is designed for application on to porous and dusting floors and not those which have a dense surface finish or are waterproof (eg. contain Ronafix or are based on a similar product).

The chemicals in RonaFloor Concrete Dustproofer aid the penetration, increasing the depth to which it will reach and react. Its  combination and reaction with free lime in the floor screed matrix converts the particles to hard, stable crystals. These crystals are bonded to, and become an integral part of, the floor.

Features and Benefits

• Dustproofing; binds surface to reduce or eliminate dust formation
• Durable; improved resistance to physical and mild chemical attack
• Easy to apply; no special tools or skills needed
• Economical; low cost material and application system

More product detail

The post Ronacrete Ronafloor Concrete Dustproofer 16.5L appeared first on Solseal.

RonaScreed FastDry Prompt is a fast-drying additive for site batched screeds used to quickly reduce the level of retained moisture within the screed. This allows floor coverings to be laid over the screed much sooner than with conventional screeds.

RonaScreed FastDry Prompt gains strength quickly, permitting early access by following trades.

Drying of screeds incorporating RonaScreed FastDry Prompt is influenced by heat generated during curing, meaning drying of thicker screeds is faster per millimetre of screed thickness. Screeds installed at 50mm can accept moisture sensitive floor coverings after only 4 days, 75mm and 100mm screeds can accept the same coverings after only 6 days.

LFeatures and Benefits

• 50mm screeds can be covered after 4 days
• 75mm screeds can be covered after 6 days
• 100mm screeds can be covered after 6 days
• Commissioning of underfloor heating can commence after 2 days
• Open to foot traffic and trades next day
• Reduces on site delays
• Rapid early strength development
• No license required

More product detail

The post Ronacrete Ronascreed FastDry Prompt appeared first on Solseal.

Ronacrete Ronafloor KSF

RonaFloor Kerb and Step Repair is a pre-packed polymer modified mortar designed for rapid strength gain and low-temperature use. Within one hour of mixing (depending on temperature) the material will have gained sufficient strength to take impact from foot and vehicle traffic. and can be placed as thin as 6mm.

The speed of RonaFloor Kerb and Step Repair makes it ideal for use on roads, motorways, slipways and ramps, tidal areas, airports and stations, in factories, warehouses and goods depots and in all other areas where speed and rapid strength gain is of paramount importance. After just 1-2 hours of mixing, the repair can be subjected to foot and vehicle traffic. As well as achieving rapid strength, it also work at low temperatures when conventional mortars cannot be used.

• Ultra-rapid strength gain
• Traffic within 1-2 hours of mixing
• Low temperature working down to -10°C
• Can be installed from 6mm
• Prepacked for ease of use and site control
• High strengths within hours
• Economical and durable

RonaFloor Kerb and Step Repair can be used in most weather conditions and in a wide temperature range, from -10°C to 25°C and above. At high ambient temperature, the working time of the mix will be considerably reduced; it will be increased at lower temperatures.

Care must be taken when using RonaFloor Kerb and Step Repair in extreme temperatures to ensure that the water used for damping, and the primer (if using), does not freeze or dry/evaporate on contact with the substrate. In very low temperatures for additional speed, warm water may be used for mixing.

The post Ronacrete Ronafloor KSF appeared first on Solseal.

Feb Febtank Plug

Feb Febtank Plug, provides a ready to use, durable plugging mortar for active water leaks in concrete and masonry.
The material expands as it cures to form a watertight seal with similar characteristics to concrete.

• Ultra-rapid setting
• Watertight seal
• Instant plugging of leaks
• Compatible with concrete
• Chloride free
• Just add water

Feb Febtank Plug is generally used to stop active water or seepage through joints, cracks and holes in concrete or masonry. This solution is most commonly used:

• As a seal for construction joints or floor joints
• For instant sewer connections
• For sealing cracks and construction joints in water retaining structures
• For rapid anchoring of bolts, conduits, pipes and railings
• As joint filling between concrete segments in tunnels, sewage systems, pipes and mines.

The post Febtank Plug 5kg appeared first on Solseal.

Febset 45 is a specially formulated repair mortar, based on magnesiaphosphate cement pre-mixed with selected aggregates, which gives controlled, extremely high early strengths in temperatures ranging from -20°C (or lower) up to over 30°C.

Trafficable after 45 minutes. High bond strength, no primers required.

• Provides controlled, extremely high early strengths and works in extremely low temperatures.
• Designed for rapid bedding/installing of steel ironwork and bonding streetscape flags, blocks and kerbs.
• Also suitable for general repairs to concrete/stone, kerbs, steps, beams, lintels and cills.

More product detail

The post FebSet 45 – 25kg appeared first on Solseal.