Ronabond Concrete Repair Mortar 25kg

RonaBond Concrete Repair Mortar is a prepacked, ready to use mortar for concrete repair and is used with Ronacrete Standard Primer which gives monolithic adhesion to all correctly prepared surfaces.

RonaBond Concrete Repair Mortar is used to repair and replace concrete damaged as a result of spalling through reinforcement corrosion, freeze/thaw cycling, impact or other damage.

• Conforms to BS EN 1504-3
• Excellent long term durability – will last as long as the surrounding concrete
• Provides protection to steel reinforcement from carbonation
• Frostproof
• Compressive strength in excess of 45N/mm2
• Suitable for structural and cosmetic repairs
• Approved by WRC for use in contact with potable water

More product detail

The post Ronacrete Ronabond Concrete Repair Mortar 25kg appeared first on Solseal.

Ronafix Pre-packed Tanking Render 25kg

Ronafix Pre-packed Tanking Render is a hand or spray applied tanking render. It is supplied as a two component mortar including a bag of pre-blended sand and cement and a bottle of polymer gauging liquid. Ronafix Pre-packed Tanking Render will produce a watertight tanking render; it is bonded to the substrate with Ronacrete Standard Primer.

Ronafix Pre-packed Tanking Render will withstand water penetration by a 30m head of water; resistance to water vapour of a 12mm layer is 120 MN·s·g^–1 100 times greater than the same thickness of sand/ cement.

Flexural, tensile and compressive strengths are considerably better than similar mixes of unmodified render.  Typical shrinkage of Ronafix Pre-packed Render/ Screed is 0.01%, similar to that of epoxy resins.

Ronafix Pre-packed Tanking Render has the highest polymer cement ratio of the Ronafix pre-packed mortars, providing the greatest flexural and tensile strengths and the greatest resistance to water/ water vapour permeability and shrinkage.

Features and Benefits

• Conforms to BS EN 988-1
• Pre-packed mortar for waterproof / tanking renders
• Hand or spray applied tanking render
• Suitable for use in basements, swimming pools, vaults, and other areas where tanking is required
• Application from 6mm
• High compressive, flexural and tensile strength
• Pre-packed for increased confidence
• Trafficable after 24 hours

More product detail

The post Ronacrete Ronafix Pre-packed Tanking Render 25kg appeared first on Solseal.

Febset 45 is a specially formulated repair mortar, based on magnesiaphosphate cement pre-mixed with selected aggregates, which gives controlled, extremely high early strengths in temperatures ranging from -20°C (or lower) up to over 30°C.

Trafficable after 45 minutes. High bond strength, no primers required.

• Provides controlled, extremely high early strengths and works in extremely low temperatures.
• Designed for rapid bedding/installing of steel ironwork and bonding streetscape flags, blocks and kerbs.
• Also suitable for general repairs to concrete/stone, kerbs, steps, beams, lintels and cills.

More product detail

The post FebSet 45 – 25kg appeared first on Solseal.