Shop Fosroc at Solseal - Next Day Delivery on all Stock Items

Fosroc Colpor 200PF 5L

Solseal — Wed, 25 Nov 2020 12:44:27 +0000

PRODUCT INFORMATION

Product Code: COLPOR200PF10

FOSROC COLPOR: Sealing and maintenance of joints in concrete roads, runways and hard standings. Particularly suitable for sealing areas where fuel and oil spillage might occur, such as aircraft fuelling areas, oil terminals, garage forecourts, parking and cargo areas.

For the sealing and maintenance of joints in concrete roads, concrete runways and hard standings. Colpor 200PF is particularly suitable for sealing areas where fuel and oil spillage might occur such as aircraft fuelling areas, oil terminals, garage forecourts, parking and cargo areas.

Benefits:
Pitch free
Cold applied — no heating equipment required
Fuel, oil and hydraulic fluid resistance
High durability and long service life
High movement accommodation
British Standard 5212 :1990 — types N, F and FB.
U.S. Federal Specification SS-S-200E :1984.

Colpor 200PF retains its movement accommodation of 25% on butt joints throughout the extremes of temperature, it does not harden in cold weather nor become excessively soft or pick up in hot conditions.

The post Fosroc Colpor 200PF 5L appeared first on Solseal.

Fosroc Thioflex 600 Gun Grade Sealant 2.5L

Solseal — Wed, 25 Nov 2020 12:44:26 +0000

Fosroc Thioflex 600 Gun Grade Sealant 2.5L

PRODUCT INFORMATION

Product Code: THIOFLEX600GG

Fosroc Thioflex 600: Multi-component, gun grade, polysulfide sealant. Packed in a ready to mix, 2.5 litre tin containing the base and curing agent in the correct proportions. For use in buildings and other applications where access for subsequent maintenance will be difficult.

Multi-component, gun grade, polysulfide sealant. The gun grade is ideal for general application. It is packed in a ready to mix, 2.5 litre tin containing the base and curing agent in the correct proportions. Thioflex 600 is particularly recommended for use in highrise buildings and other applications where access for subsequent maintenance will be difficult and the risk of early movement failure must be minimised. It is also suitable for sealing joints in brickwork, retaining walls, basements and subways.

Uses:

Sealing movement joints in building and civil engineering structures, including superstructures, floors, basements and subways.

Advantages:

Meets key international standards
Forms a tough, elastic, rubber-like seal
Accommodates continuous and pronounced cyclic movement
Excellent adhesion to most common substrates, including primed concrete, glass, aluminium and stainless steel
High resistance to ageing reduces physical damage due to climatic extremes

Design criteria:

Thioflex 600 may be applied to joints between 5 and 50 mm wide. Joints which are expected to experience cyclic movements should be designed to an optimum width : depth ratio of 2 : 1, subject to the overriding recommended minimum sealant depths set out below: 5 mm for metals, glass and other non-porous surfaces; 10 mm for all porous surfaces; 20 mm for trafficked joints and those subject to hydrostatic pressures.

To ensure that the sealant remains within its stated movement capacity (25% MAF), sealing slot widths should be designed in accordance with the recommendations of BS 6093.

The use of a surface primer is always required on porous surfaces. On non-porous surfaces a primer is not normally required except where glass or glazed surfaces are to be permanently immersed in water.

Standards compliance British Standard BS 4254 :1983. U.S. Federal Specification TT-S-00227E November 1969 (amended 1970). DTp specification for Highway Works December 1991 series 1000 clause 1017. ASTM C920-87: Type M, Grade NS, Class 25.

The post Fosroc Thioflex 600 Gun Grade Sealant 2.5L appeared first on Solseal.

Fosroc Nitoseal MS300 (600ml 10 pack)

Solseal — Wed, 25 Nov 2020 12:44:15 +0000

Fosroc Nitoseal MS300 (600ml 10 pack)

Fosroc Nitoseal MS300 is a one part, high modulus sealant based on hybrid silyl modified polyether technology. It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads. Nitoseal MS300 may be applied between 6mm and 20mm wide, for trafficked joints (up to 40mm non-trafficked). In most cases it is recommended to form a sealing slot with a square cross-section, subject to a minimum 10mm depth.

To ensure the sealant operates within its stated movement accommodation capacity the sealing slot widths should be designed in accordance with the recommendations of BS6093. Fosroc Nitoseal MS300 is also available in a non-tainting grade suitable for food area applications (Nitoseal MS300FG)

Product Code: FOSMS300

Fosroc Nitoseal MS300 is suitable for sealing saw-cut and movement joints in internal floors, and external joints where abrasion resistance is required. It can also be used for external facade joints where a tougher seal is required.

Uses

Factory floors
Sports stadia terracing
Shopping centres
Warehouse and distribution depots
Concrete hardstanding areas
Prisons

Advantages

Suitable for forklift truck traffic
Suitable for saw cut and perimeter joints
Abrasion resistant
Withstands vehicular traffic
Single component
Fast rate of cure
Easy to apply at low temperature
Can be applied to damp substrates
Primer-less for most applications (see “Priming” section)
Hard, but flexible sealant; resists picking and vandalism

Description

It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads. Nitoseal MS300 may be applied between 6mm and 20mmwide, for trafficked joints (up to 40mm non-trafficked). Inmost cases it is recommended to form a sealing slot with a square cross-section, subject to a minimum 10mm depth.

To ensure the sealant operates within its stated movement accommodation capacity the sealing slot widths should be designed in accordance with the recommendations of BS6093.

Preparation

Joints in concrete should preferably be sawn. After sawing all saw slurry must be flushed away and the joint allowed to dry.
When resealing the existing sealant should be removed from the joint and the arris cleaned back to sound clean concrete.
Remove all debris. The joint surfaces must be dry, clean and frost free. Remove all contaminants by rigorous wire brushing, grinding or grit blasting.
Any expansion joint filler must be checked to ensure it is tightly packed and no gaps or voids exist at the base of the sealing slot before positioning a bond breaker.
Note: The use of a bond breaker is not required in expansion joints containing Hydrocell XL cellular polyethylene expansion joint filler. For construction or contraction joints a bond breaker tape or back-up strip should be used. Where a particularly neat finish is required, mask the face edges of the joint before priming/sealing and remove immediately after tooling is completed.

Priming

Fosroc Primer MS2 is required for joints that are to be intermittently or permanently immersed, or where the substrate is likely to be saturated (for example, externally).
When using a primer, empty the entire contents of the hardener tin into the base tin and replace the base tin lid. Mix thoroughly by shaking for at least 2 minutes. Prime the joint face using a clean, dry brush. Avoid over application of primer causing puddles in the bottom of the joint. Nitoseal MS300 should be applied between 30 minutes and 4 hours after priming.
If a joint is left unsealed for more than 4 hours, the primer should be removed by grit blasting or grinding and the joint re-primed. Do not split packs of Fosroc Primer MS2

View our full range of Fosroc Products

View our full range of Sealants

The post Fosroc Nitoseal MS300 (600ml 10 pack) appeared first on Solseal.