Sika Sikasil Pool 300ml

Solseal — Wed, 25 Nov 2020 12:45:13 +0000

SikasilPool is a one component, neutral curing silicone sealant for use in swimming pools and permanently wet areas.

Sikasil Pool is suitable for joints in and around swimming pools, areas under permanent water immersion and frequently wet areas, such as shower rooms in sports halls or leisure facilities, between ceramics, tiles, concrete, glass, metals and other typical building substrates.

Very high water resistance
High chlorine resistance (as required in swimming pools due to use of disinfecting solutions)
Extremely high resistance to fungal attack
Excellent UV and weathering resistance
High tear resistance
Non-corrosive
High elasticity and flexibility

More product detail

The post Sika Sikasil Pool 300ml appeared first on Solseal.

Arbo Arbokol 1025 SP – Swimming Pool Sealant 1.2L

Solseal — Wed, 25 Nov 2020 12:45:12 +0000

Next working day delivery is available on this product if ordered by 2pm

Arbo Arbokol 1025 SP Swimming Pool Sealant

Arbo Arbokol 1025 SP is a unique two part epoxy sealant which cures to form a hard wearing seal, designed to accommodate small amounts of movement in extension but considerable movement in compression.

Recommended for use in a variety of internal stress relief joint systems where continual water resistance and a high degree of chemical resistance (especially to common cleaning substances) are required.

Main Applications

Swimming pools
Compression joints
Tile to tile joints (no primer required)
Long term water immersed joints
Shower rooms.

NB. Not recommended for structural joints

Application Instructions

Joint Preparation

The joint surfaces must be clean and free from all contamination.
Surfaces should be degreased using the appropriate surface.

Mixing

The ratio of base to curing agent controls the performance properties of Arbo Arbokol 1025 SP and tins are filled off to an exact mixing ratio. It is vital therefore that the whole contents of the curing agent tin are added to the base tin. The 2 components must be thoroughly mixed to ensure complete homogeneity (Spiral “pig tail” mixing equipment is recommended).

Joint Backing

Where applicable, appropriate joint filler, e.g. closed cell polyethylene foam should be used to provide the correct joint depth.

All joint preparation and sealant application should be carried out in accordance with BS8000 Part 16 (British standard for the sealing of joints in buildings).

Service Life

20 years + in non critical applications. Use in swimming pools will lower this figure (depending upon application performance required).