Arbo Arbokol 1025 SP Swimming Pool Sealant

Arbo Arbokol 1025 SP is a unique two part epoxy sealant which cures to form a hard wearing seal, designed to accommodate small amounts of movement in extension but considerable movement in compression.

Recommended for use in a variety of internal stress relief joint systems where continual water resistance and a high degree of chemical resistance (especially to common cleaning substances) are required.

Main Applications

• Swimming pools
• Compression joints
• Tile to tile joints (no primer required)
• Long term water immersed joints
• Shower rooms.

NB. Not recommended for structural joints

Application Instructions

Joint Preparation

The joint surfaces must be clean and free from all contamination.
Surfaces should be degreased using the appropriate surface.

Mixing

The ratio of base to curing agent controls the performance properties of Arbo Arbokol 1025 SP and tins are filled off to an exact mixing ratio. It is vital therefore that the whole contents of the curing agent tin are added to the base tin. The 2 components must be thoroughly mixed to ensure complete homogeneity (Spiral “pig tail” mixing equipment is recommended).

Joint Backing

Where applicable, appropriate joint filler, e.g. closed cell polyethylene foam should be used to provide the correct joint depth.

All joint preparation and sealant application should be carried out in accordance with BS8000 Part 16 (British standard for the sealing of joints in buildings).

Service Life

20 years + in non critical applications. Use in swimming pools will lower this figure (depending upon application performance required).

The post Arbo Arbokol 1025 SP – Swimming Pool Sealant 1.2L appeared first on Solseal.

Arbo Arbokol 1025 Secure Grade 1.2L

Arbokol 1025 SP is a unique two part Epoxy sealant which cures to form a hard wearing seal, designed to accommodate small amounts of movement in extension but considerable movement
in compression.  Recommended for use in a variety of internal stress relief joint systems where continual water resistance and a high degree of chemical resistance (especially to common cleaning substances) are required.

Application Instructions Joint Preparation

The joint surfaces must be clean and free from all contamination.  Surfaces should be degreased using the appropriate surface cleaner (contact Adshead Ratcliffe Technical Service Department for further information)

Mixing

The ratio of base to curing agent controls the performance properties of Arbokol 1025 SP and tins are filled off to an exact mixing ratio. It is vital therefore that the whole contents of the curing agent tin are added to the base tin. The 2 components must be thoroughly mixed to ensure complete homogeneity (Spiral “pig tail” mixing equipment is recommended).

Application

The usual application method once mixed is to fill the sealant into empty cartridge dispensers using a heavy duty follower plate. The cartridge is placed over the hole in the centre of the plate and filled by applying steady downward pressure. Insert the plunger into the cartridge and the mixed sealant is then ready for application using an Arbo Caulking Gun. The sealant should be extruded firmly into the joint by maintaining an even pressure on the trigger of the gun.

Joint Backing

Where applicable, appropriate joint filler, e.g. closed cell polyethylene foam should be used to provide the correct joint depth. All joint preparation and sealant application should be carried out in accordance with BS8000 Part 16 (British standard for the sealing of joints in buildings)

Summary Arbokol 1025 Secure Grade Anti Pick Sealant

For use in a variety of internal stress relief joint systems where a tough, non-pick seal is required

Recommended Uses

• Prisons
• Anti Pick/Anti Vandalism Sealant
• Heavy Duty Floor Joints

Not Recommended For

• Swimming Pools
• Structural Joints

Colours

• Off White
• Grey

The post Arbokol 1025 Secure Grade 1.2L appeared first on Solseal.

Product Code: AK15020P

Arbokol 2150 is a very high polymer content, two part Polysulphide Sealant which cures once the two components are mixed together to give a hard wearing but flexible seal. Arbokol 2150 has good adhesion to concrete, stone, many metals, ceramics and many other common construction substrates.

The post Arbo Arbokol 2150 Sealant 2L appeared first on Solseal.

The post Arbo Arbokol 682 Gun Grade Sealant 1.2L appeared first on Solseal.

The post Arbo Arbokol 682 Pouring Grade Sealant 1.2L appeared first on Solseal.

Specifically designed for use against Marble, Granite, Pre Cast Concrete and other sensitive natural or manmade substrates where other sealants may cause staining.

Also recommended for perimeter sealing on curtain walling and perimeter sealing of polyester powder coated and UPVC frames when the abutting substrate is a natural stone.

• One Part Non-Staining Silicone Sealant.
• Joints in Natural Stone NB
• It is strongly recommended that Arbosil XL1099 S is tested against the stone before application.

Not recommended for

• Floor Joints over 6mm
• Overpainting

Available in Black, Buff, Grey, Limestone, Portland, Rustic Red, White, Anthracite, Terracotta.

More product detail

The post Arbo Arbosil XL 1099 Non-Staining Silicone 380ml appeared first on Solseal.

Arbo Arbomeric MP20 is a one part high modulus modified polymer sealant which cures on exposure to moisture vapour to form a tough but elastic rubber.

Arbo Arbomeric MP20 is recommended for use in many forms of construction including structural joints in heavy cladding, structural movement joints in floors and floor joints in heavily trafficked areas.

NB Not recommended for joints in lightweight cladding and swimming pools.

Is over-paintable once fully cured; pre-use tests are advised to demonstrate compatibility with individual paints.

Colours

• Buff
• Grey
• Limestone
• Portland
• White
• Black

View our full Arbo Product Range

The post Arbo Arbomeric MP20 Sealant 380ml appeared first on Solseal.

Product Code: AR-MP10-380-25

Arbomeric MP10 is a one part Low Modulus Modified Polymer Sealant which cures on exposure to moisture vapour to form an elastic rubber. This product is a non silicone and can be painted

The post Arbo Arbomeric MP10 Sealant 380ml appeared first on Solseal.

The post Arbo Arbosil 1071 380ml appeared first on Solseal.

Product Code: AR-XL1075-380-25

A high quality general purpose intumescent sealant with acoustic properties.Tested in joints up to 50 mm wide and 4 hours fire resistance.

The post Arbo Arbo XL 1075 380ml appeared first on Solseal.