Shop UltraFloor at Solseal - Next Day Delivery on all Stock Items

UltraFloor Level IT Top Heavy Duty 25kg

Solseal — Mon, 19 Aug 2024 12:40:05 +0000

UltraFloor Level IT Top is a polymer rich, high strength, single part, cementitious smoothing underlayment incorporating recycled raw materials. It has exceptional abrasion resistance and is designed for use as a finished wear surface in both industrial and commercial applications. Its early strength development formulation also makes it ideal for overcoating with resin coatings.

Surface finish
Industrial applications
Pump or trowel applied
Forklift traffic at 36 hours
Moisture tolerant
Coverage: approx 3.1m² at 5mm
5-15mm thickness
Working time 30-40 minutes
Foot traffic 2-3 hours
Internal floors
Size: 25kg

The post UltraFloor Level IT Top Heavy Duty 25kg appeared first on Solseal.

UltraFloor Level IT Super Flex 30

Solseal — Mon, 19 Aug 2024 12:39:36 +0000

A two component system, Level IT Super Flex 30 is rapid setting and drying and boasts a fibre reinforced formulation. Due to a high polymer content it also offers excellent flexible properties.

It has been specifically designed for use over a wide variety of subfloors including steel mezzanine decks, flooring grade plywood and can also be applied over damp proof membranes. In addition, Level IT Super Flex 30 can be used as a finished wear surface.

Foot traffic in as little as 30 minutes
Ready to receive bonded floor coverings after 1 hour
Use over most common subfloors including flooring grade plywood and rigid steel
Ready to receive resin finishes after 24 hours
Fork lift traffic after 24 hours
Use as a finished wear surface
UFH compatible
Low odour
Protein free
NBS Source registered for ease of specification

The post UltraFloor Level IT Super Flex 30 appeared first on Solseal.

UltraFloor Level IT Super 30

Solseal — Mon, 19 Aug 2024 12:38:29 +0000

UltraFloor Level IT Super 30 is a high strength, rapid setting and drying smoothing underlayment. Designed for fast turnaround projects, Level IT Super 30 is suitable for use as an underlayment for most floor coverings including sheet vinyl, LVT, linoleum and rubber and breathable textiles.

Foot traffic in as little as 30 minutes
Ready to receive unbonded floor coverings after 45 minutes and bonded coverings in 90 minutes
Use over most common subfloors
UFH compatible
Low odour
Protein free
Coverage: approx 6m² at 2mm
2-15mm thickness
Size: 20kg bag and 4ltr bottle
NBS Source registered for ease of specification

The post UltraFloor Level IT Super 30 appeared first on Solseal.

UltraFloor Level IT Smooth 20kg

Solseal — Mon, 19 Aug 2024 12:37:58 +0000

UltraFloor Level IT Smooth is a high strength, single part, cementitious smoothing underlayment, incorporating a blend of graded fillers, fine cements and polymers. Level IT Smooth has been specially designed for use as an underlayment for most floor coverings including sheet vinyl, LVT, linoleum and rubber.

Extremely smooth finish
Superior flow
Pump or trowel applied
Suitable for underfloor heating systems
Ideal for large flooring projects
Coverage: approx 4.4m² at 3mm
2-30mm thickness
Working time 20-30 minutes
Foot traffic 2-3 hours
Internal floors
Size: 20kg bag

The post UltraFloor Level IT Smooth 20kg appeared first on Solseal.

UltraFloor Level IT Renovate Semi Rapid Fibre Reinforced Levelling Compound 20kg

Solseal — Mon, 19 Aug 2024 12:37:30 +0000

UltraFloor Level IT Renovate Semi Rapid Fibre Reinforced Levelling Compound is suitable for the refurbishment of existing internal and external floors to depths between 3-40mm. It can also be used as a light duty wearing surface. The product is suitable for use on both commercial and domestic applications. It has excellent flow properties making it ideal for a wide range of flooring substrates.

For internal and external floors
Can be used as a light duty wearing course
Foot traffic in as little as 2-2.5 hours
Ready to receive floor coverings after 4 hours
Use over most strong and stable subfloors
Fibre reinforced with flexible properties
UFH compatible
Low odour
Protein free
NBS Source registered for ease of specification

The post UltraFloor Level IT Renovate Semi Rapid Fibre Reinforced Levelling Compound 20kg appeared first on Solseal.

UltraFloor Level IT Hydra Bond 20kg

Solseal — Mon, 19 Aug 2024 12:36:51 +0000

Level IT Hydra Bond is a unique semi-rapid, high performance, single part smoothing underlayment, that will go over bitumen and old adhesive residues! It incorporates Envirobead technology which is made with 20% recycled material for improved application and reduced environmental impact. The product’s unique formulation consists of a powdered blend of cements, polymers, graded fillers and additives.

Specially formulated with Envirobead technology- a unique recycled material
Ready to receive bonded floor coverings after 4 hours
Priming not required*
Use over most common subfloors,including old adhesive residues and bitumen Moisture tolerant, low odour and protein free
Designed for underfloor heating
Extended working time of 45 minutes for optimal usability
Advanced performance water mix with exceptional flow and ease of application
Size: 20kg bag

*see datasheet for substrate types

The post UltraFloor Level IT Hydra Bond 20kg appeared first on Solseal.

UltraFloor Level IT Base Heavy Duty

Solseal — Mon, 19 Aug 2024 12:36:16 +0000

UltraFloor Level IT Base is a rapid setting and hardening, high strength, single part, cementitious smoothing underlayment incorporating recycled raw materials. Level IT Base may be mixed up and applied as single units and it’s especially suited to larger projects where it is ideal for pumping applications and can be applied up to depths of 50mm.

High compressive strength
Ideal for use with Level IT Top
Pump or trowel applied
Walk on: 3 hours
Moisture tolerant
Coverage: approx 3m² at 5mm
5-50mm thickness
Working time 30-40 minutes
Internal floors
Size: 25kg
NBS Source registered for ease of specification

The post UltraFloor Level IT Base Heavy Duty appeared first on Solseal.

Ultra Floor Suppress IT Moisture Vapour Suppressant

Neil Aldam — Fri, 16 Aug 2024 14:48:21 +0000

Ultra Floor Suppress IT Moisture Vapour Suppressant

UltraFloor Suppress IT is a ready to use single component rapid drying moisture suppressant primer membrane. It is water based and solvent free and must be applied in two coats. Designed to suppress residual construction moisture thus allowing earlier installation of floor coverings.

Water based, solvent free formulation
Single component
Up to 95% RH protection
Removes the need to prime
Coverage: approx 16.5m² based on two coats
Resealable bottle, eliminating waste
Pigmented orange for coverage control
Size: 5ltr
NBS Source registered for ease of specification

More product detail

The post Ultra Floor Suppress IT Moisture Vapour Suppressant appeared first on Solseal.

Ultra Floor DPM It Rapid Curing Primer Membrane

Neil Aldam — Fri, 16 Aug 2024 14:31:25 +0000

Ultra Floor DPM It Rapid Curing Primer Membrane

UltraFloor DPM IT is a two component, solvent free epoxy resin system for use as a surface damp proof membrane and as a screed bonding aid (primer) for industrial flooring applications. DPM IT has been designed to provide protection against subfloor moisture and as a primer for bonded screed installations.

Surface DPM
Two-part epoxy resin system
Primer for bonded screed applications
Fast cure system
Dual chamber packaging
98% RH floor moisture tolerance
Pot life 45-75 minutes
Cure time 5 hours
Internal floors
Size: 5kg and 10kg units
Coverage will vary dependent on surface regularity and porosity
NBS Source registered for ease of specification

More product detail

The post Ultra Floor DPM It Rapid Curing Primer Membrane appeared first on Solseal.

Ultra Floor Level IT Pro 30 Rapid Setting Smoothing Compound

Neil Aldam — Fri, 16 Aug 2024 12:11:36 +0000

Ultra Floor Level IT Pro 30 Rapid Setting Smoothing Compound

UltraFloor Level IT Pro 30 is a high performance, high tolerance, free-flowing, rapid setting and drying two-part smoothing underlayment. Specifically designed for use over a wide variety of subfloors including moisture tolerant adhesive residues. Decorative floor coverings can be bonded to internal subfloors in as little as 90 minutes after the application of UltraFloor Level IT Pro 30.

Can receive foot traffic in as little as 30 minutes
Ready to receive unbonded floor coverings after 45 minutes and bonded floor coverings after 90 minutes
Priming not required
Can be used over most common subfloors, including old adhesive residues
UFH compatible
Moisture tolerant
Low odour
Protein free
Ammonia free
20kg bag and 4.6l bottle
NBS Source registered for ease of specification

More product detail

The post Ultra Floor Level IT Pro 30 Rapid Setting Smoothing Compound appeared first on Solseal.